YC ESD
Specifications & RFQ worksheet
Compare dimensions, capacities and construction details for PCB trolleys and SMT reel carts. Use the worksheet below to record your board or reel dimensions, order quantity and delivery requirements, then print it for your purchasing records or quotation request.
https://ycesd.com · sales@ycesd.com
Fill in the RFQ worksheet below, then print or choose Save as PDF. Entries stay on this page and are not submitted.
PCB storage trolleys
On a small screen, scroll sideways to read the specification table.
| Slotted-panel series | Nominal board capacity options | Overall L × W × H (mm) |
|---|---|---|
| 350 mm | 200 / 300 / 400 / 500 | 900 × 550 × 1260 |
| 460 mm | 200 / 300 / 400 / 500 | 900 × 550 × 1260 |
| 530 mm | 200 / 300 / 400 / 500 | 900 × 650 × 1260 |
| 630 mm | 200 / 300 / 400 / 500 | 900 × 650 × 1260 |
Capacity and fit conditions
Nominal capacities allow for 100 boards per bay without tall components. Populated boards may need unused slots between them for clearance, reducing usable capacity. The 350, 460, 530 and 630 mm values refer to the slotted-panel series, not the maximum PCB width. Check board dimensions and component heights when selecting a layout.
Construction and configuration
- Frame and slotted panels
- 201 stainless steel frame; PP slotted panels
- Bay adjustment
- Adjustable bay width with numbered guide slots
- Guide-slot pitch
- 10 mm between adjacent slot centers
- Caster size and mounting
- 4-inch threaded-stem casters; conventional and ESD options
- Nominal board capacity
- 200, 300, 400 or 500 boards, subject to board fit and component clearance
Check board and reel fit
Start with board length, width and thickness, then check which edges will sit in the guides and the component clearance on both sides. A dimensioned board or panel drawing helps identify components close to the supported edges. Include the number of boards to be stored and any floor-space limits. Select the slotted panels and bay spacing to fit the boards, then check the overall trolley dimensions against your workspace.
ESD configuration requirements
Specify your caster requirements, floor conditions, grounding arrangement and acceptance criteria. If you need resistance measurements, testing to a particular method or certification documents, include these in your inquiry so their availability can be confirmed for the selected configuration.
https://ycesd.com/en/products/pcb-trolleys/
https://ycesd.com/en/selection-guide/
SMT reel storage carts
On a small screen, scroll sideways to read the specification table.
| Total hanging positions | Tiers | Positions per tier, both sides | Overall L × W × H (mm) |
|---|---|---|---|
| 60 | 6 | 10 | 1000 × 500 × 1600 |
| 70 | 7 | 10 | 1000 × 500 × 1600 |
| 72 | 6 | 12 | 1200 × 500 × 1600 |
| 84 | 7 | 12 | 1200 × 500 × 1600 |
| 96 | 8 | 12 | 1200 × 500 × 1800 |
| 112 | 8 | 14 | 1400 × 500 × 1800 |
| 120 | 6 | 20 | 2000 × 500 × 1600 |
Capacity and fit conditions
Position counts include both sides: 6 tiers × 10 positions per tier gives 60 positions in total. Actual reel capacity depends on reel dimensions, usable rod length and loading clearance; one hanging position does not necessarily equal one reel. This table covers carts with a base tray. Check the loading layout against your reels before ordering.
Construction and configuration
- Frame material
- 201 stainless steel
- Reel storage layout
- Double-sided hanging rods with a base tray
- Tier options
- 6, 7 or 8 tiers, depending on the hanging-position configuration
- Caster arrangement
- 3-inch plate-mounted swivel casters: two braked and two unbraked
- Assembly method
- Bolted, knock-down construction
Check board and reel fit
Provide each reel’s outside diameter, overall width and center-hole diameter, together with the quantity of each size. If reels will remain in bags, include their packed dimensions. These measurements help determine rod spacing, tier clearance and room to load and remove reels. Use the overall reel width when planning storage, as carrier-tape width is a separate measurement.
ESD configuration requirements
Specify your caster requirements, floor conditions, grounding arrangement and acceptance criteria. If you need resistance measurements, testing to a particular method or certification documents, include these in your inquiry so their availability can be confirmed for the selected configuration.
https://ycesd.com/en/products/smt-reel-storage/
https://ycesd.com/en/selection-guide/
Request for quotation worksheet
Complete the worksheet and print a copy, or print it blank to fill in by hand. Your entries are not submitted or saved automatically, so print a copy before leaving the page. Include units with every dimension.
PCB: length, width, board thickness and component heights on both sides. Reels: outside diameter, overall width and center hole diameter; include the dimensions with packaging if stored in bags.
Include the country, city or postal code, and your preference for assembled or knock-down packing. For a freight estimate, specify delivery to a port or a street address.
Request a quote
Email your completed requirements and any reference drawings to sales@ycesd.com. Include your preferred configuration so we can discuss fit, pricing, packing and lead time.
sales@ycesd.comOpen the inquiry formhttps://ycesd.com/en/contact/